External and Internal Infrared Thermography Building Survey

An internal and external infrared building thermography survey by AiroTech of a recently renovated old mill conversion discovered the following infrared thermography thermal anomalies. Thermal bypass, missing insulation, air infiltration and poor detailing (loss of integrity of both the weatherproof and air layers).

Explanations

1. Thermal Bypass:

  • Description: Thermal bypass occurs when heated or cooled air moves around insulation, bypassing the intended thermal barrier.
  • Causes: Gaps in insulation, poor sealing around windows, doors, or other penetrations, or poorly sealed ducts.
  • Impact: Increased energy consumption as heating/cooling systems work harder to maintain the desired temperature. It could also lead to uneven temperatures within the building.

2. Missing Insulation:

  • Description: Missing or insufficient insulation leads to unprotected areas that allow heat to escape or enter.
  • Causes: Poor installation, degradation of materials over time, or unintentional gaps in insulation during renovations or conversions.
  • Impact: Higher energy costs and discomfort due to heat loss or gain in certain areas. It may also lead to localized moisture issues if warm air meets cold surfaces.

3. Air Infiltration:

  • Description: Air infiltration is when outside air leaks into the building through gaps and cracks, usually around windows, doors, or where materials meet.
  • Causes: Deterioration of weatherproofing, gaps around windows/doors, or lack of proper sealing at junctions of building elements.
  • Impact: Increased heating and cooling costs, discomfort, drafts, and potential for moisture problems leading to mold or condensation.

4. Poor Detailing (Loss of Integrity of Weatherproof and Air Layers):

  • Description: Poor detailing refers to areas where the weatherproof and air barriers do not meet or overlap properly, allowing for thermal bridging and air leakage.
  • Causes: Inadequate planning or construction errors, especially in areas like corners, where air and weatherproofing layers often lack continuity.
  • Impact: Loss of insulation effectiveness, energy inefficiency, and potential damage from water ingress leading to decay or mold.

5. Lack of Continuity of Insulation (Especially at Corners):

  • Description: Insulation is often less continuous in areas like corners, junctions between walls and floors, or around windows and doors.
  • Causes: Difficulties during construction, or an oversight in areas that are harder to access or detail, like tight corners or junctions.
  • Impact: Cold spots, drafts, and poor energy performance due to thermal bridges.

Project Details

  • Aberdeenshire

  • Private Client

  • Infrared Thermography Building Survey

  • February 2025

IR Building Survey, Aberdeenshire
IR Building Survey, AberdeenshireIR Building Survey, Aberdeenshire
IR Building Survey, AberdeenshireIR Building Survey, Aberdeenshire
IR Building Survey, AberdeenshireIR Building Survey, Aberdeenshire
IR Building Survey, AberdeenshireIR Building Survey, Aberdeenshire
IR Building Survey, AberdeenshireIR Building Survey, Aberdeenshire
IR Building Survey, Aberdeenshire
Contact Us

Needing Infrared Thermography?

If you require Infrared Thermography for your Commercial or Residential property, please contact AiroTech for a quotation or to discuss your requirements.

Contact Us